HP PCI Multiplexer Family Cabling, Diagnostics, and Troubleshooting Manual

Troubleshooting and Diagnostics
Driver Status Menu Selections
Chapter 6 85
The data can be captured and saved for later review. The default file
name for input data is /tmp/eqnin and the default file name for output
data is /tmp/ eqnout. If desired, the data scope can be configured to run
continuously. You can specify whether to view receive data, send data or
both.
Termio
Highlight Termio and press Return key. This selection displays general
terminal interface data associated with the port (see Figure 6-12). It is
similar to the stty command in that it displays all enabled termio flags.
Figure 6-12 Termio flags display
Register Dump
Highlight Register Dump and press Return key. This option (see Figure
6- 13) displays a real-time window of the on-board registers.