HP X.25/9000 Release Notes (June 2006)

HP X.25 Release Notes
Patches and Fixes in This Version
Chapter 116
8606212990 When more than one process/thread is using the same socket descriptor
and the socket is put to non-blocking mode, the select() on the receive
may hang even though there is data to process.
8606218073 The system panics in the X.25 socket layer code with the top of the
panic stack containing "XIQ_F0_a_data_ind+0x168". This panic is
observed when the inbound data is received with 'D' bit set.
8606218061 Customer cannot start the SNMP x25subagt on PA-RISC 1.1 systems.
8606167689 System may crash when the J3526A card goes into "fatal" error
mode. When the system crashes the console message would contain
the following message: "J3526_F_it_handler(): Reject bit set (CBSP =
0x....) for card 0x....".
8606164900 Panic on N-class with 8 T1/E1 cards.
8606145490 Cross-bus deadlock due to DMA stuck in STOPPED state.
8606167193 Lot of x29server processes shown up in "ps -ef" output with PPID as 1
(init process).
8606168699 Non-privileged user is permitted to remove the temporary files created
by others in /var/x25/tmp directory.
8606170403 System panicked in XIQ_F_handler function during ACC (Advanced
Communications Controller) stress testing.
8606171296 "x29server" may not accept the second connection, if more than one
listen stream is configured.
8606168899 x25init sometimes fails with "nc ioctl X25_SET_SNID" failed
message.
8606178251 When the J3526A card is reset in a loop for about 1000 times, the
system panicked with "Data page fault" message.
8606172402 Memory leak (512 bytes) when X25_SETUP_PVC ioctl is processed.
8606171598 "x25stat" command must be enhanced to show "VC Up Time" for all
active virtual circuits.
Table 1-5 Fixes (Continued)
SR Number Description