HP X.25/9000 Release Notes (September 2008)

HP X.25 Release Notes
Compatibility Information and Installation Requirements
Chapter 1 9
Upgrading
Upgrading from HP-UX 10.20 to HP-UX 11i or from HP-UX 11.00 to
HP-UX 11i is supported. This does not require the removal of the
previous version of the software. The new J2793B software can be
installed readily.
First Time Installations
If you are installing the X.25 link hardware and software for the first
time, follow the instructions provided with your hardware and software
documentation. Refer to the section “Manuals Available for this Version”
earlier in this release notes for a list of the available documentation.
Version Compatibility and Installation Requirements
J3526A 4 PCI 32- or 64-bit
Table 1-2 Supported Adapters (Continued)
Supported
Adapters
Number of
Ports
Bus Type
HP-UX 11i
OS
Table 1-3 Supported Interfaces
Adapters RS-232 V.35/V.36 X.21 RS-449 RS-530
J2792A 64 Kbps 64 Kbps 256 Kbps 256 Kbps NA
J2794A 64 Kbps 64 Kbps NA 1.5 Mbps NA
J2815A 64 Kbps NA 256 Kbps NA NA
J3525A 64 Kbps 64 Kbps 2 Mbps 2 Mbps 2 Mbps
J3526A 64 Kbps 64 Kbps 2 Mbps 2 Mbps 2 Mbps
Table 1-4 Version Compatibility and Installation Requirements
OS platform and version compatibility HP-UX version 11i
Disk space required to install 12 MB (64-bit), 11MB (32-bit)