HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

MACHINE=bill \
SENDFILES=yes REQUEST=yes CALLBACK=no \
READ=/
WRITE=/
COMMANDS=ALL
NOTE: You can verify current permissions with the uucheck -v command.
5. Create the following entry in the /etc/x25/x29hosts file:
pad_uucp {
device bill
name interface0
remote_x121 [bill’s X.121_address]
logging 3
x3 default_x3
}
Refer to “Configuring the x29hosts file” (page 104) earlier in this section for the definitions of
these parameters.
6. Launch /usr/sbin/x29uucpd at the HP-UX command prompt.
At the “bill” system:
7. Make the following modifications to the pad_spt section of /etc/x25/x29hosts file:
pad_spt {
remote_x121 [dave’s X.121_address or
“*” for all addresses]
logging 3
x3 hp_padsrvr
}
Refer to “Configuring the x29hosts file” (page 104) earlier in this section for the definitions of
these parameters.
8. Launch the x29server process with /usr/sbin/x29server -l3 for example.
9. Verify the contents of /etc/passwd (this file is linked with dave’s Systems file) which should
look like this:
uucp::5:3::/var/spool/uucppublic:/usr/lib/uucp/uucico
At the terminal prompt, assign the password “test” to the uucp user:
bill# passwd uucp
10. Add the following lines to the /usr/lib/uucp/Permissions file:
LOGNAME=uucp \
SENDFILES=yes REQUEST=yes CALLBACKI=no \
READ=/ \
WRITE=/ \COMMANDS=ALL
where the LOGNAME parameter creates a link with dave’s Systems file.
11. Test the X.25 connection using:
106 PAD services