HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

NOTE: The values listed for parameter 13 may be combined by specifying the sum of the values.
For example, specifying 3 is the same as specifying 1 and 2.
DescriptionX.3 Parameter
Specifies the number of padding characters to be added following a line feed. This is
used for hard copy terminals to allow time for the paper to be moved up. The range is 0
through 7.
14 - Line Feed Padding
Specifies whether data editing is allowed from the terminal during data transfer (for
example, character delete and line delete). 1 indicates that editing is allowed; 0 indicates
that no editing is allowed.
15 - Editing
When editing is allowed, specifies which character to use for character delete. The range
is 0 through 127.
16 - Character Delete
Specifies which character to use for the line delete character (when editing is allowed).
The range is 0 through 127.
17 - Line Delete
Specifies which character to use for the line display character (when editing is allowed).
The range is 0 through 127.
18 - Line Display
Specifies whether and how PAD service signals can be edited. This parameter is valid
when the setting of X.3 Parameter 6 is not 0. The possible values are shown below.
19 - Edit Service Signals
MeaningValue
No editing permitted.0
Editing permitted for printing terminals.1
Editing permitted for display terminals.2
Editing permitted using specified character.8 OR 32 to 126
NOTE: If you specify a value greater than 7, that value specifies the editing character. This
parameter is available only for networks using the 1984 standard.
DescriptionX.3 Parameter
This parameter specifies which characters will not be echoed. X.3 Parameter 2 - Echo
takes precedence over this parameter. The possible values are shown below.
20 - Echo Mask
MeaningValue
Do not echo carriage return.1
Do not echo line feed.2
Do not echo VT, HT, and FF.4
Do not echo BEL and BS8
Do not echo ESC and ENQ.16
Do not echo ACK, NAK, STX, SOH, EOT, ETB, and ETX.32
Do not echo characters specified in X.3 Parameters 16, 17, and 18.64
Do not echo NUL, SO, SI, DLE, DC1, DC4, SYN, CAN, EM, SUB, FS, GS, RS, US, and
DEL.
128
116 PAD services