HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

Parameters DisplayedFrame Type
No parameter displayedFRMR In
“Rsn 1” means the control field received was not defined
or not implemented. “Rsn 3” means the control field
FRMR Out
received was invalid. “Rsn 4” means the information field
received was too long. “Rsn 8” means the control field
received contained an invalid variable.
“N(XX)” is an internal variable of no importance or
meaning.
REJ In/Out (level 2)
“Local” means that the RNR has been sent. “Remote” means
that the RNR has been received.
LINK Bsy (level 2)
Table 38 Output format
Baud control (tx and rx counter)pri
a
0X.25 level 1 (mod=210)
Baud control (threshold exceeded)pri 0
Baud control (number of times threshold
exceeded)
pri 0
a
pri = Logging priority level
Examples of the strace command
To display all event messages from X.25 level 3 for all interfaces, use:
strace 200 all all
To display all event messages from X.25 level 3 for interface 0, use:
strace 200 48 all
To display event messages from X.25 level 3 with priority levels 1 to 3, and from X.25 level 2 with
priority levels 1 and 2, use:
strace 200 all 3 201 all 2
Examples of strace output
The command:
strace 200 48 all
gives the following output:
324112 14:59:16 33683766 1 ... 200 48 CALL Out:‘30’ lci 400 gfi 1
324115 14:59:16 33683776 1 ... 200 48 CAA In:‘30’ lci 400 gfi 1
324116 14:59:16 33683776 6 ... 200 48 DATA Out:‘30’ lci 400 ns/nr 0000
324119 14:59:16 33683778 6 ... 200 48 DATA In:‘30’ lci 400 ns/nr 0001
324124 14:59:16 33683781 2 ... 200 48 CLR Out:‘30’ lci 400 C/D 00f2
324127 14:59:16 33683782 2 ... 200 48 CLC In:‘30’ lci 400
Column labels to help you interpret the output are shown in the following table:
datasubmodindpriticstimerecord num
CALL Out48200...13368376614:59:16324112
The command:
strace 200 49 all
gives the following output:
324191 14:59:59 33688076 1 ... 200 49 CALL In:‘31’ lci 400 gfi 1
324192 14:59:59 33688086 1 ... 200 49 CAA Out:‘31’ lci 400 gfi 1
128 Tracing and logging utilities