HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

NOTE: Refer to “Using Non-English subscription forms” (page 141) for the English equivalents of
the French, Italian, German, and Spanish fields that appear on non-English subscription forms.
Using SMH’s on-line help
The SMH on-line Help provides information (descriptions, formatting, and ranges) for all fields.
You can access the SMH on-line Help system by:
• Clicking on the Help button in a dialog or message box to display information about how to
use the dialog, or about the message.
• Pressing F1 to display information about the object selected by the cursor (for example, a data
entry field).
• Selecting an item from the Help menu (located on the menu bar). You can display information
about the current SMH dialog, keyboard navigation within SMH, using the SMH Help system,
and the version of SMH you are currently running.
Configuring an X.25 address
Follow the steps below to configure an X.25 address:
1. From the Configure X.25 Software window, select Configure X.25 Address. The following
dialog appears:
Figure 2 Configure an X.25 address
NOTE: The SMH windows and dialogs shown on these pages are intended only as examples.
The information that appears in your SMH dialogs, such as the Card Name and Programmatic
Access Name, depends on your particular communications hardware.
2. Enter or modify the field values as required (refer to the field descriptions below).
Table 1 Field descriptions
DescriptionField
Name of the file that will contain the parameters for configuring the interface (a
physical port). If you are configuring more than one interface, specify a unique
configuration file for each interface.
The configuration file must be named x25config_npx, where n represents the
communications card number (use 0 for the first card, increasing the value by 1 for
Configuration File name
each additional card up to 255), p is a place marker, and x is the port number (1
14 Configuration