HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

Figure 3 Configure X.25 virtual circuits (VCs)
2. Enter or modify field values as required (refer to the field descriptions below).
When you configure the Quantity column (starting with the number of Permanent VCs), SMH
automatically fills in the starting Logical Circuit Identification (LCI) as you Tab between fields.
Table 2 Field descriptions
DescriptionField
Number of Permanent VCs. Use the value given on your subscription form.Permanent - Quantity
Number of Switched (inbound) VCs. Use the value given on your subscription form.Switched (inbound) -
Quantity
Number of Switched (two-way) VCs. Use the value given on your subscription form.Switched (two-way) -
Quantity
Number of Switched (outbound) VCs. Use the value given on your subscription form.Switched (outbound) -
Quantity
3. Click OK to return to the Configure X.25 Card window when you have finished configuring
X.25 Virtual Circuits.
Configuring an Internet address
Follow the steps below to configure an Internet address:
1. From the Configure X.25 Card window, select Configure Internet Address. The following dialog
appears:
16 Configuration