HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

Table 10 Throughput classes and line speeds (continued)
Line speed Baud rate (bps)CCITT class number
12007
24008
48009
960010
1920011
4800012
6400013
7. Click OK to return to the Configure X.25 Card window when you have finished verifying level
3 values.
Verifying level 2 values
Follow the steps below to verify level 2 values:
NOTE: If you subscribe to a public network, the network provider will provide the appropriate
settings for all level 2 parameters. These settings will differ depending on the network provider
and the type of service to which you subscribe. Refer to your Network Subscription Form for the
correct settings for your configuration.
1. At the Configure X.25 Card window, select Verify Level 2 Values. The following dialog appears:
Figure 9 Verify level 2 values
Select either Modulo-8 or Modulo-128 to set the Level 2 Modulo values. The default is Modulo-8.
The valid window-size values for Modulo-8 range from 1 to 7. For Modulo-128, the valid
window-size values range from 1 to 127.
2. Enter or modify field values as required (refer to the field descriptions below). Use the Help
button to display information and instructions for each field.
22 Configuration