HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

NOTE: System Administration Manager (SAM) is deprecated in the 11iv3 release of HP-UX. HP
System Management Homepage (HP SMH), an enhanced version of SAM, is introduced for
managing HP-UX.
1. If you have not already done so, type smh at the HP-UX prompt.
2. At the SMH main window, select Tools. Numerous object lists are displayed.
3. At the Networking and Communications window, highlight Hosts and click OPEN. Highlight
Local Hosts and click OPEN.
SMH displays all remote system names and IP addresses that have already been configured.
4. Select Add from the Actions menu. The following dialog appears:
NOTE: The appearance of the Add Internet Connectivity dialog may be slightly different
from the example below depending on the version of the X.25 software you are running.
Figure 10 Add Internet connectivity dialog
5. Enter or modify field values as required (refer to the field descriptions below). Use the Help
button for information and instructions for each field.
A Provide X.25 Information button may appear on this dialog depending on the Internet
address you configure. If it does, follow the instructions in Step 6. SMH may also decide that
a gateway is required, again depending on the Internet address you configure (see the on-line
Help for more information on gateways and the gateway dialog).
Table 12 Add Internet connectivity field descriptions
DescriptionField
Identifier by which the remote system is known on the network. It is composed of
four integers (0 to 255) separated by periods (for example, 192.2.3.6). Use the
Internet Address
Add Aliases button to assign one or more aliases (in alphanumeric format) to the IP
Address for easier referencing. When you exit this field, SMH determines whether
a gateway is needed for the connection, or whether you need to provide X.25
information for the remote system. If the Provide X.25 Information button is displayed,
follow the instructions in Step 6 below.
Name assigned to the remote system to which you want to connect.Remote System Name
Use this field to add useful information about the remote system (for example, the
name and telephone number of the user).
Comments
24 Configuration