HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

Example 3 LLC2 configuration
#
# Likely runstring: x25init -c x25init_llc2_smpl
X.121 7111 # X.121 address
X.121_packet '' “ # use a null (i.e. length 0) packet address
(TransPacaddressing)
name interface0 # interface name for Level 3 access
device lan0 # device to initialize
XOL_logical_port_id 0 # logical port id for lan interface
XOL_DSAP 0x7E # destination SAP id
XOL_SSAP 0x7E # source SAP id
XOL_destination_macaddr 0x080009c4728a # Remote mac address
# Following needed only for Local High Availability feature
#standby_device lan1 # standby lan card for local failover.
#XOL_floating_macaddr 0x0060B0A4EBE5 # Unique Mac address to be assigned to the
lan card before bringing the XOL interface up.
# Level 2 Parameters
#
t1 3000
t3 60000
framesize 149
n2 20
l2window 7
# Level 3 Parameters
# virtual circuit parameters
# logical channel id, start num [1-4095], type, how many
lci 1 pvc 5 # 5 permanent VCs
lci 255 insvc 5 # 5 one-way incoming SVCs
lci 2048 svc 6 # 6 two-way switched VCs
networktype TRANSPAC # CCITT 1984, DTE (see /etc/x25/x25_networks)
fast_select enabled # allow incoming calls with call user data
reverse_charge enabled # allow incoming calls requesting reverse changes
def_inpacketsize 128 # default packetsize
def_outpacketsize 128 # default packetsize
def_inwindow 7 # default window size
def_outwindow 7 # default window size
def_inthruputclass 19200 # default thruput class
Configuring X.25 over LLC2 29