HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

x25init -c x25_box_0_host -L llc2_lan_2
Stopping:
To stop the configuration, execute the following commands:
x25stop -d lan2 -L 0 # stop XOL interface with logical port id 0 on
lan2
To Connect Box 1 to HOST
To implement the above configuration, the following configuration files need to be created on the
BOX 1.
• Generic X.25 configuration file, x25_box_1_host.
• LLC2 configuration file, llc2_lan_3
The generic X25 configuration file has to be created in the /etc/x25 directory using the example
configuration file, /etc/x25/x25init_llc2_smpl.
The file x25_box_0_host should contain all the mandatory level 2 and level 3 parameters. Along
with them it should contain the following entries:
device lan3
XOL_logical_port_id 0
XOL_destination_macaddr 0x080009DBEA7
XOL_DSAP 0x7E
XOL_SSAP 0x7E
The LLC2 specific configuration file, llc2_lan_2 is created in the /etc/x25 directory with the following
entries:
lan3 1
To start and stop above configuration:
Starting:
Execute the following commands at the command prompt:
x25init -c x25_box_0_host -L llc2_lan_3
Stopping:
To stop the configuration execute the following commands:
x25stop -d lan3 -L 0 # stop XOL interface having logical port id 0 on
lan3
Troubleshooting LLC2 configuration
Symptom: Unable to connect to the remote node.
Causes:
• Hardware address of the remote node is wrongly configured in the configuration file.
• The SAP value is incorrectly configured.
• The LCI value is incorrectly configured.
36 Configuration