HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

• PAD printer server
• PAD UUCP server
• X.3 sets of parameters
See “PAD services” (page 94) for detailed reference information on PAD services.
This section assumes that SMH is running and that you are starting from the main window. If this
is not the case, type smh at the HP-UX prompt before continuing.
Remember to use the Help button (in the SMH window) to display information and instructions for
the content of each field.
Add/Modify PAD terminal emulation (local to remote)
Follow the steps below to add or modify PAD terminal emulation for a remote system:
1. At the SMH main window, highlight Networking and Communications and select Open
Item from the Actions menu.
2. At the Networking and Communications window, highlight X.25 PAD Services and select Open
Item from the Actions menu.
3. Highlight Terminal Emulator and select Open Item from the Actions menu.
SMH displays an object list that shows all remote systems currently configured for PAD terminal
emulation.
4. Select Add from the Actions menu to configure PAD terminal emulation for an unlisted remote
system, or highlight a remote system from the list and select Modify.
5. Enter or modify field values as required.
6. Click Apply to apply the new settings and to add additional system connections. Click OK to
save changes and exit this dialog.
7. Select Exit from the List menu to return to the X.25 PAD Services dialog.
NOTE: If you enabled Reverse Charge Requested, you must also configure the PAD support
server. See “Add/Modify PAD support server (remote to local)” (page 56) for step-by-step
instructions for configuring the PAD support server.
8. Select the next PAD service you need to configure from the list on the X.25 PAD Services dialog.
Add/Modify PAD support server (remote to local)
Follow the steps below to add or modify a PAD support server for a local terminal or system:
1. At the SMH main window, highlight Networking and Communications and select Open
Item from the Actions menu.
2. At the Networking and Communications window, highlight X.25 PAD Services and select
Open Item from the Actions menu.
3. Highlight Support Server and select Open Item from the Actions menu.
SMH displays an object list that shows all terminals/systems currently configured for access
via X.25.
4. Select Add from the Actions menu to configure a terminal/system that is not listed for access
via X.25, or highlight a terminal/system from the list and select Modify.
5. Enter or modify field values as required.
6. Click Apply to apply the new settings and to add additional PAD support servers. Click OK
to save changes and exit this dialog.
7. Select Exit from the List menu to return to the X.25 PAD Services dialog.
8. Select the next PAD service you need to configure from the list on the X.25 PAD Services dialog.
56 Configuration