HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

Add/Modify PAD printers server
Follow the steps below to add or modify remote PAD printers:
1. At the SMH main window, highlight Networking and Communications and select Open
Item from the Actions menu.
2. At the Networking and Communications window, highlight X.25 PAD Services and select
Open Item from the Actions menu.
3. Highlight Printers Server and select Open Item from the Actions menu.
SMH lists all remote printers that your system can currently access via X.25.
4. Select Add from the Actions menu to configure access to an unlisted remote printer, or highlight
a remote printer from the list and select Modify.
5. Enter or modify field values as required.
6. Click Apply to apply the new settings and to add additional PAD printers. Click OK to save
changes and exit this dialog.
7. Select Exit from the List menu to return to the X.25 PAD Services dialog.
8. Select the next PAD service you need to configure from the list on the X.25 PAD Services dialog.
Add/Modify UUCP server
Follow the steps below to add or modify a UUCP server:
1. At the SMH main window, highlight Networking and Communications and select Open
Item from the Actions menu.
2. At the Networking and Communications window, highlight X.25 PAD Services and select
Open Item from the Actions menu.
3. Highlight UUCP Server and select Open Item from the Actions menu.
SMH lists all remote systems currently configured for X.25 PAD UUCP connectivity.
4. Select Add from the Actions menu to configure PAD UUCP connectivity for an unlisted remote
system, or highlight a remote system from the list and select Modify.
5. Enter or modify field values as required.
6. Click Apply to apply the new settings and to add additional PAD UUCP connections. Click
OK to save changes and exit this dialog.
7. Select Exit from the List menu to return to the X.25 PAD Services dialog.
8. If necessary, select the next PAD service you need to configure from the list.
In order for PAD UUCP connectivity to function correctly, UUCP must also be configured. If
you have not already done this, you can configure UUCP by returning to the Networking and
Communications window, highlighting UUCP and selecting Open Item from the Actions menu.
From this dialog you can configure UUCP Devices and/or UUCP Remote Systems (see the
on-line Help or UUCP documentation for more information).
Add/Modify X.3 parameters
Follow the steps below to add or modify X.3 parameters. Refer to “PAD services” (page 94) for
detailed descriptions of the X.3 parameters.
Configuring PAD services 57