HP X.25/9000 User's Guide HP-UX 11i v3 (5900-1523, August 2011)

0 CRC/frame errors received
0 received frames with no buffer
0 received frames with no flow control
0 receive buffer overflows
The level 3 “State” under the heading “SUBNETWORK STATISTICS FOR X25” can be:
Table 21 Level 3 state
Description/MeaningOutput on Screen
X.25 link level 3 is downLink not up
Restart packet sent (r2
2
)Connecting to DXE
1
Restart packet sent (r2)Connected resolving DXE
Waiting before retransmitting a restart after a “collision”
(packet sent at the same time as packet received)
Random wait started
X.25 link level 3 normal (r1)Connected and resolved DXE
Waiting on restart confirmationDTE RESTART REQUEST
Level 2 going downWaiting link disc reply
Restart sent after retryBuffer to enter WtgRES
Waiting for restart reply during “link going down” phaseBuffer to enter L3restarting
Waiting for buffer to clear VCs during “link going down”
phase
Buffer to enter L_disconnect
Unable to define error/problemUnknown
1
DXE is DCE or DTE
2
r2, like r1, is a CCITT definition of a state/condition
The level 2 “Link state” under the heading “STATISTICS FOR LAPB” can be:
Table 22 Level 2 link state
Description/MeaningOutput on Screen
Level 2 upNORMAL
DTE - Level 1 disconnectedADM
DCE - Level 1 disconnectedPOLLING
Level 1 connectedSTART
Level 2 downRESET
Level 2 downOFF
NOTE: T4 under “STASTISTICS FOR LAPB” is only an internal parameter; it is not configurable.
The level 1 “Link state” under the “STASTISTICS FOR WAN” heading can be:
Table 23 Level 1 link state
Description/MeaningOutput on Screen
WAN connection establishedHDLC_ESTB
No WAN connection establishedHDLC_IDLE
WAN connection disabledHDLC_DISABLED
x25stat 87