SATADVD-00 (satadvd) B.11.31.1209 Mass Storage Driver Release Notes HP-UX 11i v3 Abstract This document contains specific information that is intended for users of this HP product.
© Copyright 2012, 2013, 2014 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
1 SATADVD-00 overview The SATADVD-00 bundle in HP-UX Application Release 1209 contains version B.11.31.1209.01 of the satadvd driver, which supports the DVD drive on HP Integrity rx2800 i2 servers 2 Release history Table 1 SATADVD-00 Release History Release Bundle Version Application Release 0809 B.11.31.0809 Application Release 0903 B.11.31.0903 Application Release 1003 B.11.31.1003 Application Release 1109 B.11.31.1109 Web Release 1111 B.11.31.1111 Application Release 1203 B.11.31.
5 Known problems and limitations • Installation may hang when SATADVD-00 bundle versions 1203 or lower are upgraded to later versions; this situation happens while /usr/lbin/utild daemon is active in the system. utild is installed as a part of the Utilization Provider software. Workaround: To prevent the hang during installation of the driver, halt the utild daemon before you install the satadvd driver. To halt the daemon and install the driver, follow these steps: 1. Log in to the server as root. 2.
7. To install the satadvd driver, follow the installation procedure at the following: https://h20392.www2.hp.com/portal/swdepot/displayinstallinfo.do? productNumber=SATADVD-00 8. 9. To reenable utild, remove the hash sign from the beginning of the inittab line. Use init q to force init to read the inittab file; then verify that utild has started.
