Administration
Gigabit-Specific Information
Chapter 3
43
Card Information Example
To display the card information, enter:
$ lanadmin -x card_info
ppa
*********** Version Information ***********
Driver version: B.11.23.05
Firmware version: 12.4.5
Chip version: 0x6
PCI-XPCI-X Sub-System ID: 0x106f (1000Base-SX)
PCI-X Sub-Vendor ID: 0x103c
Board revision: C
Software Key: 6
Engineering Date Code: B-3845
*********** Card Setting ***********
Driver State: IGELAN_ONLINE
Auto Negotiation: On
Flow Control: On
Send Max Buf Descriptors: 16
Recv Max Buf Descriptors: 1
Send Coalesced Ticks: 1000
Recv Coalesced Ticks: 0
Card Statistics Example:
To display the card statistics, enter:
$ lanadmin -x stats drv
ppa
NOTE See Appendix D, “Card Statistics,” on page 95 for a sample output and explanation of the
card statistics.
Send Buffer Coalescing Example:
To display the send buffer coalescing threshold, enter:
$ lanadmin -x send_max_bufs
ppa
Send buffer coalescing threshold = 16
Receive Interrupt Coalescing Example:
To display the receive interrupt coalescing ticks, enter:
$ lanadmin -x recv_coal_ticks
ppa
Receive interrupt coalescing ticks = 0
Flow Control Example:
To display the flow control setting, enter:
$ lanadmin -x fctrl
ppa
Flow control is enabled
