Troubleshooting
Diagnostic Flowcharts
Chapter 4
68
Flowchart 10 Procedures
The procedures in Figure 4-11 (Flowchart 10) are:
• Enter netfmt(1M) and view the error and disaster log messages. For example:
netfmt -vf /var/adm/nettl.LOG00
It will help to use the time stamp to find proper logs. Ensure you are looking at
Ethernet information.
Note that the names of the NetTL log files are:
— For releases prior to HP-UX 11i: nettl.LOG-00 and nettl.LOG-01
— For release HP-UX 11i and later: nettl.LOG000 and nettl.LOG001
• If the problem is solved, continue to the ifconfig Test (Flowchart 11).
• If the problem persists, run lanadmin(1M) to reset the card.
• If the reset is successful, go to Link Level Test (Flowchart 2). Otherwise, reset the
card once more; if it is still not successful, call your HP representative.
