Card Statistics
lanadmin Display
Appendix D
96
lanadmin Display
This page shows a sample of a lanadmin(1M) command display. The fields are defined in
the following sections.
LAN INTERFACE STATUS DISPLAY
Sun, Jun 21,1998 14:49:43
PPA Number = 3
Description = lan3 HP 1000Base-SX card HW Rev
A-3814
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 1000000000
Station Address = 0x60b0c401d4
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 14
Inbound Octets = 2220359858
Inbound Unicast Packets = 87658661
Inbound Non-Unicast Packets = 577
Inbound Discards = 0
Inbound Errors = 0
Inbound Unknown Protocols = 0
Outbound Octets = 2729643634
Outbound Unicast Packets = 107383997
Outbound Non-Unicast Packets = 285158
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 655367
Ethernet-like Statistics Group
Index = 9
Alignment Errors = 0
FCS Errors = 0
Single Collision Frames = 0
Multiple Collision Frames = 0
Deferred Transmissions = 0
Late Collisions = 0
Excessive Collisions = 0
Internal MAC Transmit Errors = 0
Carrier Sense Errors = 0
Frames Too Long = 0
Internal MAC Receive Errors = 0
NOTE This example was the result of running the lanadmin command for Gigabit Ethernet.
The “PPA Number” entry in this listing would be “Network Management ID” if the
command was run for Fast Ethernet.
