Ethernet Support Guide for HP-UX 11i v3

Table 4 Feature support per driver (continued)
10 Gigabit EthernetGigabit EthernetFast
Ethernet
iocxgbe
10GigEthr-03
iexgbe
10GigEthr-02
icxgbe
10GigEthr-01
ixgbe
10GigEthr-00
igelan
GigEther-01
gelan
GigEther-00
iether
IEther-00
btlanFeature
YesYesYesYesYesYesYesYesInterrupt
migration
YesYesYesYesYesYesYes
10
NoInterrupt
coalescing
YesYesNoNoYesNoYesNoLink handling
YesYesYesYesYesYesYesYesDLKM
Yes
12
Yes
12
Yes
12
Yes
12, 13
YesYesYesYesHP APA
aggregate
mode
11
YesYesYesYesYesYesYesYesHP APA
failover
(LAN_MONITOR
mode)
YesYesYesYesYesNoYesNoHPVM AVIO
YesYesNoNoNoNoNoNoHPVM DIO
YesYesYesYesYesYesYesYesHP
Serviceguard
Yes
14
YesYesYesYesYesYesYesPCI OLRAD
YesYesYesYesYesYesYesYesPCI Error
handling/
recovery
15
YesYesYesYesNoNoYesNovPars V6
YesYesYesYesYesYesYesYesHP-UX LAN
provider
YesYesYesYesYesYesYesYes
16
MIB (SNMP)
and driver
statistics
YesYesYesYesYesYesYesYesnettl
tracing/
logging
1
Not supported with Flex-10 interfaces. With non-Flex-10 interfaces, must be disabled if Jumbo Frames are used.
2
Supports UDP multifragment CKO.
3
Supports TCP/UDP IPv4 multifragment CKO on some cards.
4
On first function of each port.
5
The AD385A card supports Destination Port-based Steering (DPS) by default; the card supports configuration of TCP
4-tuple, UDP 4-tuple. The AB287A card supports TCP 4-tuple, UDP 2-tuple.
6
TCP 4-tuple; UDP 2-tuple (IPv4 only).
7
Supported only on 1000 Mbit/s or faster interfaces; the link partner must also support Jumbo Frames.
8
For iexgbe, several restrictions exist (see Section 3.7 (page 29)).
9
Does not support stripping.
10
Not supported on PCIe cards.
11
Not supported on server blade downlinks with Virtual Connect interconnects. Virtual Connect does not support aggregates
(trunks), LACP, or otherwise on the downlinks side.
12
Only LACP mode is supported with APA aggregation over 10GbE links.
1.5 Features offered by HP-UX drivers and associated cards 13