Ethernet Support Guide for HP-UX 11i v3

SRVR06 /> nwmgr
Name/ Interface Station Sub- Interface Related
ClassInstance State Address system Type Interface
============== ========= ============== ======== ============== =========
lan2 UP 0x001F29F2908C igelan 1000Mbps
lan4 DOWN 0x00215AB004BC iexgbe 10GBASE-KR
lan5 DOWN 0x00215AB004BE iexgbe 10GBASE-KR
lan0 UP 0x001F29F29092 igelan 1000Mbps
lan1 UP 0x001F29F29093 igelan 1000Mbps
lan6 UP 0x001B78290818 iether 1000Mb/s
lan7 UP 0x001B78290819 iether 1000Mb/s
lan3 UP 0x001F29F2908D igelan 1000Mbps
lan900 DOWN 0x000000000000 hp_apa hp_apa
lan901 DOWN 0x000000000000 hp_apa hp_apa
lan902 DOWN 0x000000000000 hp_apa hp_apa
lan903 DOWN 0x000000000000 hp_apa hp_apa
lan904 DOWN 0x000000000000 hp_apa hp_apa
lan8 UP 0x984BE12F3598 iocxgbe 10GBASE-KR
lan9 UP 0x984BE12F359C iocxgbe 10GBASE-KR
lan10 UP 0x984BE12F3599 iocxgbe 10GBASE-KR
lan11 UP 0x984BE12F359D iocxgbe 10GBASE-KR
lan12 UP 0x984BE12F359A iocxgbe 10GBASE-KR
lan13 UP 0x984BE12F359E iocxgbe 10GBASE-KR
lan14 UP 0x984BE12F359B iocxgbe 10GBASE-KR
lan15 UP 0x984BE12F359F iocxgbe 10GBASE-KR
The MAC address is a unique 48-bit identifier used when configuring the system. The MAC
address labelled on each card refers to LAN port A or 1 (on a multi-port card). Add 1 (hex)
to obtain the MAC address for each additional port.
Multi-function devices include a unique MAC address for each function configured by HP-UX.
For information about how MAC addresses are assigned for cards, see the appropriate card
installation guide at the following website:
www.hp.com/go/hpux-iocards-11iv3-docs
For information about how MAC addresses are assigned in a blade enclosure, see the HP
Virtual Connect for c-Class BladeSystem Setup and Installation Guide at the following location:
http://www.hp.com/go/bladesystem/documentation (select the Installation tab)
lanscan command: PPA number, H/W path
The lanscan command displays the hardware path and the PPA number, in addition to the
MAC address (station address). In the following example taken from the same system as the
preceding nwmgr command example, the line highlighted in bold shows the hardware path
0/4/0/0/0/0, the MAC address 0x984BE12F3598, the interface lan8 and snap8, and
the PPA number 8.
SRVR06 /> lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/2/2/0 0x001F29F2908C 2 UP lan2 snap2 1 ETHER Yes 119
0/3/0/0/0/0 0x00215AB004BC 4 UP lan4 snap4 2 ETHER Yes 119
0/3/0/0/0/1 0x00215AB004BE 5 UP lan5 snap5 3 ETHER Yes 119
0/1/1/0 0x001F29F29092 0 UP lan0 snap0 10 ETHER Yes 119
0/1/1/1 0x001F29F29093 1 UP lan1 snap1 11 ETHER Yes 119
0/5/0/0/0/0 0x001B78290818 6 UP lan6 snap6 14 ETHER Yes 119
0/5/0/0/0/1 0x001B78290819 7 UP lan7 snap7 15 ETHER Yes 119
0/2/2/1 0x001F29F2908D 3 UP lan3 snap3 16 ETHER Yes 119
LinkAgg0 0x000000000000 900 DOWN lan900 snap900 18 ETHER Yes 119
LinkAgg1 0x000000000000 901 DOWN lan901 snap901 19 ETHER Yes 119
LinkAgg2 0x000000000000 902 DOWN lan902 snap902 20 ETHER Yes 119
LinkAgg3 0x000000000000 903 DOWN lan903 snap903 21 ETHER Yes 119
LinkAgg4 0x000000000000 904 DOWN lan904 snap904 22 ETHER Yes 119
0/4/0/0/0/0 0x984BE12F3598 8 UP lan8 snap8 148 ETHER Yes 119
0/4/0/0/0/1 0x984BE12F359C 9 UP lan9 snap9 149 ETHER Yes 119
0/4/0/0/0/2 0x984BE12F3599 10 UP lan10 snap10 150 ETHER Yes 119
2.3 Verifying the Ethernet LAN installation 17