Ethernet Support Guide for HP-UX 11i v3

B Card statistics
This appendix interprets the statistics displayed by the nwmgr command.
B.1 nwmgr display
This page shows a sample of a nwmgr command display including all Extended MIB statistics. The
following is an example of a nwmgr command that displays the Extended MIB statistics:
nwmgr --stats extmib -c lanppa
The fields are defined in the following sections.
*** lan0 Extended MIB statistics:
Interface Name = lan0
PPA Number = 0
Description = lan0 HP PCI-X 1000Base-T Release
B.11.31.01
Interface Type = 1000Base-T
MTU Size = 1500
Speed = 100 Mbps
Station Address = 0x0018FE28E4FD
Administration Status = UP
Operation Status = UP
Last Change = Sat Sep 29 10:30:56 2007
Inbound Octets = 6481850892
Inbound Unicast Packets = 507001
Inbound Multicast Packets = 56384
Inbound Broadcast Packets = 18603494
Inbound Discards = 0
Inbound Errors = 0
Inbound Unknown Protocols = 2905838
Outbound Octets = 45804959
Outbound Unicast Packets = 493847
Outbound Multicast Packets = 0
Outbound Broadcast Packets = 9036
Outbound Discards = 0
Outbound Errors = 0
Counter Discontinuity Time = Sat Sep 29 10:30:54 2007
Physical Promiscuous Mode = FALSE
Physical Connector Present = TRUE
Interface Alias =
Link Up/Down Trap Enable = Enabled
Index = 1
Alignment Errors = 0
FCS Errors = 0
Internal MAC Transmit Errors = 0
Frame Too Long Errors = 0
Internal MAC Receive Errors = 0
Symbol Errors = 0
Single Collision Frames = 0
Multiple Collision Frames = 0
SQE Test Errors = 0
Deferred Transmissions = 0
Late Collisions = 0
Excessive Collisions = 0
Carrier Sense Errors = 0
Control Field Errors = 0
Multicasts Accepted = 0
Duplex Status = Full Duplex
Rate Control Ability = FALSE
Rate Control Status = TRUE
Collision Count = 0
Collision Frequency = 0
B.1 nwmgr display 63