IEther-00 (iether) B.11.31.1303 Ethernet Driver Release Notes (2nd Edition)

PCI OLRAD
PCI Error handling and recovery
vPars V6
HP Integrity Virtual Machines (HPVM)
HPVM AVIO
HP-UX LAN provider
MIB and driver statistics
Configurable using SMH or nwmgr
nettl tracing/logging
3 New and changed features in this release
3.1 New features
There are no new features included in this version of IEther-00 at the time of this publication.
3.2 Changed features
The iether driver has been enhanced with performance and stability improvements.
4 Problems fixed in this or earlier versions
4.1 Problems fixed in this version
At the time of this publication, there were no defects or fixes included in this release. For the most
current information, contact your HP support representative.
4.2 Problems fixed in previous releases
Table 1 HP-UX 11i v3 March 2013 fixes IEther-00 B.11.31.1303
DescriptionSR number
Link timeout to PCIe device with Superdome 2 XFabric failover.QXCR1001233383
This problem was reported on Superdome2 servers, involving PCIe dual-port LAN controller
chips (AD221A, AD222A, and AD393A adapters). An error on the Superdome 2 XFabric
link immediately causes a fabric failover from that link to the redundant path. Transmissions
that were in process on the failing link are replayed along the redundant path. During Crossbar
Fabric failovers, an I/O adapter could encounter a completion timeout (CTO) for transactions
being transmitted at the instant of failover. In such a scenario, the adapter might be declared
as defective although it is performing well. The CTO value on the affected I/O adapters is
not high enough to account for the XFabric failover time.
Table 2 HP-UX 11i v3 December 2012 fixes IEther-00 B.11.31.1212
DescriptionSR number
On multiple-CPU systems and a high-transmit load, the iether driver might cause intermittent
system hangs or high CPU utilization.
QXCR1001247694
In addition, under these circumstances, systems with MC/Serviceguard might exhibit a
cluster-reformation or system Transfer Of Control (TOC).
Potentially poor network performance might be observed when operating the LAN adapter
at 10Mb or 100Mb half-duplex. The following adapters could be impacted: AD221A,
AD222A, AD393A, and rx2800 LAN on Motherboard (LOM) adapters.
QXCR1001200917
4