IEther-00 (iether) B.11.31.1307 Ethernet Driver Release Notes (1st Edition) HP-UX 11i v3

• PCI OLRAD
• PCI Error handling and recovery
• vPars V6
• HP Integrity Virtual Machines (HPVM)
• HPVM AVIO
• HP-UX LAN provider
• MIB and driver statistics
• Configurable using SMH or nwmgr
• nettl tracing/logging
3 New and changed features in this release
3.1 New features
There are no new features included in this version of IEther-00 at the time of this publication.
3.2 Changed features
The iether driver has been enhanced with performance and stability improvements.
4 Problems fixed in this or earlier versions
4.1 Problems fixed in this version
At the time of this publication, there were no defects or fixes included in this release. For the most
current information, contact your HP support representative.
Table 1 HP-UX 11i v3 July 2013 fixes — IEther-00 B.11.31.1307
DescriptionSR number
Previous settings in nettlgen.conf are overwritten when a new version of the driver is installed.
The installation script should not overwrite the entry if it's modified.
QXCR1001292750
PCIe AD393A GbE/FC adapter's GbE SX fiber ports down after updating IETHER to
B.11.31.1209.01 and subsequent release. This issue is seen only with AD393A GbE/FC
adapters.
QXCR1001284665
4.2 Problems fixed in previous releases
Table 2 HP-UX 11i v3 March 2013 fixes — IEther-00 B.11.31.1303
DescriptionSR number
Link timeout to PCIe device with Superdome 2 XFabric failover.QXCR1001233383
This problem was reported on Superdome2 servers, involving PCIe dual-port LAN controller
chips (AD221A, AD222A, and AD393A adapters). An error on the Superdome 2 XFabric
link immediately causes a fabric failover from that link to the redundant path. Transmissions
that were in process on the failing link are replayed along the redundant path. During Crossbar
Fabric failovers, an I/O adapter could encounter a completion timeout (CTO) for transactions
being transmitted at the instant of failover. In such a scenario, the adapter might be declared
as defective although it is performing well. The CTO value on the affected I/O adapters is
not high enough to account for the XFabric failover time.
4