Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Hubs
2-12 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:48 PM
7. Go to www.compaq.com/products/storageworks/adapters.html and check for the
latest Fibre Channel host bus adapter driver version supported.
IMPORTANT: Skip the following step if you have the latest Fibre Channel HBA driver
installed on the server.
8. Download the latest Fibre Channel HBA driver utility and install the utility on
each server, one server at a time.
Running the FC-AL Setup Utility
IMPORTANT: Run this utility before any NT File System (NTFS) volumes are created on the
storage subsystem. If NTFS volumes exist, running FC-AL Setup and rebooting may reassign
drive letters. Refer to the storage subsystem documentation for details on drive letter
reassignment.
The FC-AL Setup Utility installs the version of the HSZDISK driver required for
Windows NT Clusters and sets the ALPA and registry parameters.
To run the FC-AL Setup Utility:
1. Insert the storage subsystem CD-ROM from the HSG80 NT Intel platform kit in
the CD-ROM drive.
2. Select Solution Software for ACS.
3. Click Skip Driver Upgrade.
4. Select Fibre Channel Software Setup.
5. Select one of the Fibre Channel Software setups based on your system
configuration.
6. Follow the instructions on the screen.