Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Hubs
2-30 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:48 PM
Setting Up a Single Cluster with an Additional Storage Subsystem
(Dual Controller Configuration, Transparent Failover or Multibus
Failover)
1. Set up the cluster with the first storage subsystem according to instructions
starting on page 2-4.
2. To add a second storage subsystem, follow the installation instructions starting
on page 2-4 with the important exceptions included in Table 2-6.
Table 2-6: Setting Up a Single Cluster with an Additional Storage
Subsystem (Dual Controller, Transparent Failover or Multibus
Failover)
Chapter 2 Section Heading Page Action
Setting Up the Servers 2-3 Omit
Installing the Host Bus Adapter 2-5 Omit
Installing the StorageWorks
Command Console Client
2-8 Omit
Installing the Adapter Drivers 2-11 Omit
Running the FC-AL Setup Utility 2-12 Omit
Cluster Installation and
Verification
2-22 Omit
Setting Up Dual Storage
Controllers
2-26
Execute this step.
NOTE: Refer to Chapter 5 for information on adding shared storage.