HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Introduction
Required Configuration Components
You will need the components in Table 1-1 to install the HA/F500 for EVA
Enhanced DT cluster.
NOTE: Only the HP StorageWorks Secure Path software is included in this kit.
Table 1-1: Required Components
Components Supported Products
Up to eight cluster nodes For a current list of supported HP ProLiant servers, refer to
http://www.hp.com/servers/proliant/highavailability
Operating system Microsoft Windows Server 2003, Enterprise Edition
Microsoft Windows 2000 Advanced Server
Host bus adapters (HBAs) HP StorageWorks 64-bit/33-MHz PCI-to-Fibre Channel HBAs
HP StorageWorks FCA2101 PCI-to-Fibre Channel HBAs
Four Fibre Channel switches HP StorageWorks Fibre Channel switches
For a current list of supported HP ProLiant servers, refer to
http://www.hp.com/servers/proliant/highavailability
Fibre Channel cables Shortwave Length (SWL) Multimode
Longwave Length (LWL) Single mode
(non-FCIP configuration)
Fibre Channel interconnects Gigabit Link Module (GLM) SWL
Gigabit Interface Converter (GBIC) LWL or Very Longwave
Length (VLWL) (non-FCIP configuration)
continued
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide 1-5
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: b-ch1 Introduction.doc
Codename: 49ers IV Part Number: 339223-002 Last Saved On: 9/30/03 10:44 AM