HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Cluster Installation
Figure 2-5: Initialize an HSV Storage System window
5. In the Step 1: Enter a Name field, enter the site name.
6. In the Step 2: Enter the number of disks field, enter the maximum number of
disks (minimum of eight in a disk group) or the number of disks you will use in
the default disk group.
NOTE: You must determine if you will configure your storage in a single disk group or multiple
disk groups.
CAUTION: Do not use the browser Back button because you will undo the previous
operation.
7. Select Advanced Options to set up the clock.
IMPORTANT: Set up the clock on both EVAs to pull time from the same source.
NOTE: HP recommends selecting double for disk failure protection.
2-16 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2 Cluster Installation.doc
Codename: 49ers IV Part Number: 339223-002 Last Saved On: 9/30/03 10:46 AM