FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Configuring the Product
32 Embedded Web Server User Guide
Configuring Operating Parameters
Perform this procedure to configure the product’s preferred domain ID, insistent
domain ID, rerouting delay, and domain registered state change notifications
(RSCNs). The product must be set offline to configure the preferred domain ID.
To configure parameters:
1. If you are going to set the preferred domain ID, set the product offline as
follows:
a. Choose Operations from the navigation panel. The Operations page
displays.
b. Click the Online State tab, then click Set Offline. The following message
displays: Your operations changes have been
successfully activated.
2. Choose Configure from the navigation panel. The Configure page displays.
3. Click the Switch or Director tab, as appropriate. Click the Parameters tab to
display the Parameters tab view (Figure 7).
Figure 7: Configure product parameters tab view
a. At the Preferred Domain ID field, type a value of 1 through 31. The
domain ID uniquely identifies each product in a fabric.