FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager Appliance Installation Guide (AA-RU5FC-TE/958-000324-002, March 2005)
Grounding methods
There are several methods for grounding. Use one or more of the following methods
when handling or installing electrostatic-sensitive pa r ts:
• Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a mini mum of 1 me gohm
+/- 10 percent resistance in the ground cords. To provide proper ground, wear
the strap snug a
gainst the skin.
• Use heel strap
s, toe straps, or bootstraps at standing workstations. Wear the
straps on both
feet when standing on conductive floors or dissipating floor mats.
• Use con ducti
ve field service tools.
• Use a portabl
e field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, h ave an
Authorized
HP Reseller install the part.
NOTE:
For more inf
ormation on static electricity, or assistance with product installation,
contact your Authorized HP Reseller.
78
Regulatory compliance and Safety