HP HSR6600 Router and Router Processing modules series - A6600_HSR6602-CMW520-R3102 Release Notes

55
1 RSE-X1 Normal Master 0
2 RSE-X1 Normal Slave 0
3 FIP-110 Normal N/A 4
4 FIP-210 Normal N/A 2
Handling software upgrade failures
If a software upgrade fails, the system runs the old software version. To handle a software failure:
1. Check the physical ports for a loose or incorrect connection.
2. If you are using the console port for file transfer, check the HyperTerminal settings (including the
baud rate and data bits) for any wrong setting.
3. Check the file transfer settings:
 If XMODEM is used, you must set the same baud rate for the terminal as for the console port.
 If TFTP is used, you must enter the same server IP addresses, file name, and working directory as
set on the TFTP server.
 If FTP is used, you must enter the same FTP server IP address, source file name, working directory,
and FTP username and password as set on the FTP server.
4. Check the FTP or TFTP server for any incorrect setting.
5. Check that the storage device has sufficient space for the upgrade file.
6. If the message “Something is wrong with the file” appears, check the file for file corruption.