R3102-R3103-HP 6600/HSR6600 Routers ACL and QoS Command Reference

138
Default command level
2: System level
Parameters
filename: P2P signature file name, which must be suffixed with .mtd.
Usage guidelines
Place the signature file in the root directory. The system can load a signature file only from the root
directory.
Examples
# Load the P2P signature file p2p.mtd.
<Sysname> system-view
[Sysname] dar p2p signature-file flash:/p2p.mtd
dar protocol-group
Use dar protocol-group to create a P2P protocol group and enter its view.
Use undo dar protocol-group to delete the specified protocol group.
Syntax
dar protocol-group group-id
undo dar protocol-group group-id
Default
No protocol group exists in the system.
Views
System view
Default command level
2: System level
Parameters
group-id: Protocol group ID in the range of 1 to 64.
Examples
# Create P2P protocol group 1.
<Sysname> system-view
[Sysname] dar protocol-group 1
[Sysname-protocol-group-1]
dar protocol-statistic
Use dar protocol-statistic to enable the packet accounting function of DAR.
Use undo dar protocol-statistic to disable the packet accounting function of DAR.
Syntax
dar protocol-statistic [ flow-interval time ]