R3102-R3103-HP 6600/HSR6600 Routers ACL and QoS Command Reference

140
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the DAR packet statistics in both directions for all interfaces.
<Sysname> display dar protocol-statistic p2p
Interface: GigabitEthernet1/0/1
Protocol In/Out Packet Count Byte Count Bit Rate Max Bit Rate
in - min in - min
(bps) (bps)
-------- ------ ------------- --------------- ------------ -----------
BitTorrent IN 33 1034 - -
OUT 10 650 - -
eMule/eDonkey IN 24 948 - -
Total IN 57 1982 - -
OUT 10 650 - -
Interface: GigabitEthernet2/0/1
Protocol In/Out Packet Count Byte Count Bit Rate Max Bit Rate
in - min in - min
(bps) (bps)
-------- ------ ------------- --------------- ------------ -----------
MSN OUT 23 1480 - -
Total OUT 23 1480 - -
Table 41 Command output
Field Descri
p
tion
Protocol Protocol name.
In/Out Direction of packets (inbound/outbound)
Packet Count Number of packets.
Byte Count Number of bytes.
protocol
Use protocol to add the specified protocol to the current protocol group.
Use undo protocol to delete the specified protocol from the protocol group.
Syntax
protocol protocol-name
undo protocol protocol-name
Default
No protocol exists in a protocol group.