R3102-R3103-HP 6600/HSR6600 Routers ACL and QoS Configuration Guide

11
Task Command Remarks
Display configuration and match
statistics for IPv4 basic, IPv4
advanced, and Ethernet frame
header ACLs.
display acl { acl-number | all | name
acl-name } [ slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about the ACL
acceleration feature.
display acl accelerate { acl-number | all } [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display configuration and match
statistics for IPv6 basic and IPv6
advanced ACLs.
display acl ipv6 { acl6-number | all | name
acl6-name } [ slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the usage of ACL rules.
(See the following matrix for
information about the support for
the command.)
display acl resource [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the configuration and
status of one or all time ranges.
display time-range { time-range-name | all }
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Clear statistics for one or all IPv4
basic, IPv4 advanced, and
Ethernet frame header ACLs.
reset acl counter { acl-number | all | name
acl-name }
Available in user view.
Clear statistics for one or all IPv6
basic and advanced ACLs.
reset acl ipv6 counter { acl6-number | all |
name acl6-name }
Available in user view.
The following matrix shows the display acl resource command and hardware compatibility:
Hardware Com
p
atibilit
y
6602 No
HSR6602 No
6604/6608/6616
• Routers with RPE-X1 or RSE-X1 installed: Yes
• Routers with MCP installed: No
ACL configuration examples
IPv4 advanced ACL configuration examples
Network requirements
A company interconnects its departments through Router A. Configure an ACL to:
• Permit access from the President office at any time to the financial database server.
• Permit access from the Financial department to the database server only during working hours (from
8:00 to 18:00) on working days.
• Deny access from any other department to the database server.