R3102-R3103-HP 6600/HSR6600 Routers ACL and QoS Configuration Guide

78
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a class and enter class
view.
traffic classifier classifier-name
[ operator { and | or } ]
By default, the and keyword is
used, and the relation between
match criteria is logical AND.
3. Configure match criteria.
if-match [ not ] match-criteria N/A
Defining a traffic behavior
Configuring AF and the minimum guaranteed bandwidth
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a traffic
behavior and enter
traffic behavior view.
traffic behavior behavior-name
The specified behavior name cannot be the
name of any system-defined behavior.
3. Configure AF and the
minimum guaranteed
bandwidth.
queue af bandwidth bandwidth
N/A
You can apply this traffic behavior only to the outgoing traffic of an interface or ATM PVC.
Configuring EF and the maximum bandwidth
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a traffic
behavior and enter
traffic behavior
view.
traffic behavior behavior-name
The specified traffic behavior name cannot
be the name of any system-defined
behavior.
3. Configure EF and
the maximum
bandwidth.
queue ef bandwidth bandwidth [ cbs
burst ]
N/A
Configuring WFQ
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a traffic
behavior and enter
traffic behavior view.
traffic behavior
behavior-name
The specified traffic behavior name cannot be the
name of any system-defined behavior.
3. Configure WFQ.
queue wfq N/A
Configuring a WRED drop action
To configure a WRED drop action: