R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

126
Related commands
6602/HSR6602:
• display current-configuration
• display saved-configuration
• reset saved-configuration
6604/6608/6616:
• display current-configuration
• display saved-configuration
• reset saved-configuration
• slave auto-update config
slave auto-update config
Use slave auto-update config to enable the configuration auto-update function for the standby MPU to
automatically save the running configuration as the active MPU does when you execute the save [ safely ]
[ backup | main ] [ force ] command or the save file-url all command.
Use undo slave auto-update config to disable the function.
Syntax
slave auto-update config
undo slave auto-update config
Default
The configuration auto-update function is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
slave auto-update config No No Yes
If configuration auto-update is disabled, the save [ safely ] [ backup | main ] [ force ] command and the
save filename all command save the running configuration only to the active MPU.
To ensure configuration consistency across MPUs, HP recommends enabling the function.
The save command executed with only the file-url argument saves the running configuration only to the
specified path, regardless of whether the configuration auto-update function has been enabled.
Examples
# Enable configuration auto-update.
<Sysname> system-view