R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

133
Field Descri
p
tion
attribute
Attributes of a system software image:
• main—The device always attempts to load this image at
startup.
• backup—The device attempts to load this image is the main
image is not available or has been corrupted.
• secure—The device attempts to load this image if neither a
main or backup image is available or can be used. You
cannot set a secure image at CLI. To specify a secure image,
access the Boot menu during the startup process. For more
information, see the software upgrade part in the release
notes for your device.
The boot file used next time System software image to be used at the next startup.
# On the 6604/6608/6616 router, display system software images.
<Sysname> display boot-loader
Master Board(slot0):
The boot file used this time:cfa0:/A6608.bin attribute: main
The boot file used next time:cfa0:/A6608.bin attribute: main
The boot file used next time:cfa0:/A6608_bak.bin attribute: backup
Failed to get the secure boot file used next time!
Slave Board(slot1):
Slave Board is Absent.
Table 20 Command output
Field Descri
p
tion
Master Board Active MPU.
The boot file used this time System software image that has been loaded.
attribute
Attributes of a system software image:
• main—The device always attempts to load this image at
startup.
• backup—The device attempts to load this image is the main
image is not available or has been corrupted.
• secure—The device attempts to load this image if neither a
main or backup image is available or can be used. You
cannot set a secure image at CLI. To specify a secure image,
access the Boot menu during the startup process. For more
information, see the software upgrade part in the release
notes for your device.
The boot file used next time System software image to be used for the next startup.
Slave Board Standby MPU.
Slave Board is Absent The standby MPU is not in the slot.
Related commands
boot-loader