R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

136
Field Descri
p
tion
Common
Number of common patches. These patches are formally released to users.
A common patch always includes the functions of its previous temporary
patches.
Current Total number of patches.
Running Number of patches in RUNNING state.
Active Number of patches in ACTIVE state.
Start-Address Start address of the patch memory area in the memory.
patch active
Use patch active to activate patches.
Syntax
patch active [ patch-number ] slot slot-number
Views
System view
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch, in the range of 1 to 200. If no sequence
number is specified, this command validates all DEACTIVE patches. If a sequence number is specified,
this command activates the specified patch and all its previous DEACTIVE patches.
slot slot-number: Specifies a card by its slot number.
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
slot slot-number No
Yes (fixed at 0, which specifies
the current device)
Yes
Usage guidelines
Before executing this command, you must use the patch load command to load patches.
The patch active command changes the state of DEACTIVE patches to ACTIVE state and runs the patches.
To continue to run these patches after a reboot, use the patch run command to change their state to
RUNNING. If not, the state of ACTIVE patches changes back to DEACTIVE at a reboot.
Examples
On the 6602 router:
# Activate patch 3 and all its previous DEACTIVE patches.
<Sysname> system-view
[Sysname] patch active 3
# Activate all DEACTIVE patches.