R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

138
# Stop running patch 3 and all its subsequent ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive 3
# Stop running all ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive
On the HSR6602 router:
# Stop running patch 3 and all its subsequent ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive 3 slot 0
# Stop running all ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive slot 0
On the 6604/6608/6616 router:
# Stop running patch 3 and all its subsequent ACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch deactive 3 slot 1
# Stop running all ACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch deactive slot 1
patch delete
Use patch delete to remove patches from the patch memory area.
Syntax
patch delete [ patch-number ] slot slot-number
Views
System view
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch, in the range of 1 to 200. If no sequence
number is specified, this command removes all patches in the patch memory area. If a sequence number
is specified, this command removes the specified patch and all its subsequent patches.
slot slot-number: Specifies a card by its slot number.
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
slot slot-number No
Yes (fixed at 0, which
specifies the current device)
Yes