R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

141
Default
The 6602/6604/6608/6616 router loads patches from the cfa0:/ directory.
The HSR6602 router loads patches from the flash:/ directory.
Views
System view
Default command level
3: Manage level
Parameters
slot slot-number: Specifies a card by its slot number.
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
slot slot-number No
Yes (fixed at 0, which specifies
the current device)
Yes
file patch-package: Specifies a patch package file.
Usage guidelines
If patches are released in a package, you must use the patch install command to install patches.
Before executing the patch load command, save the patch files to the correct directory.
To change the patch loading location, use the patch location command.
On the 6602/HSR6602 router, save the patch files to the root directory of the storage medium.
On the 6604/6608/6616 router, save the patch files for the active MPU, interface cards, or switching
fabric modules to the root directory of the active MPU's storage medium, and save the patch files for the
standby MPU to the root directory of the standby MPU's storage medium.
In FIPS mode, the patch file or the patch package file must pass authenticity verification before the patch
load command is executed.
Examples
# Load patches on the 6602 router.
<Sysname> system-view
[Sysname] patch load
# Load patches on the HSR6602 router.
<Sysname> system-view
[Sysname] patch load slot 0
# On the 6604/6608/6616 router, load patches from a patch file for the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch load slot 1
patch location
Use patch location to configure the patch loading location.