R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

147
clock summer-time repeating
Use clock summer-time repeating to set a recurring daylight saving schedule.
Use undo clock summer-time to cancel the configuration of the daylight saving time.
Syntax
clock summer-time zone-name repeating start-time start-date end-time end-date add-time
undo clock summer-time
Default
Daylight saving time is disabled and UTC time zone applies.
Views
System view
Default command level
3: Manage level
Parameters
zone-name: Specifies a daylight saving time schedule by a zone name, a case-sensitive string of 1 to 32
characters.
start-time: Specifies a start time, in the hh:mm:ss format. Zeros can be omitted, unless you specify
00:00:00.
start-date: Specifies a start date, which can be set in the following ways:
• Enter the year, month and date at one time, in the MM/DD/YYYY or YYYY/MM/DD format.
• Enter the year, month and date one by one, separated by spaces. The year is in the range of 2000
to 2035; the month can be January, February, March, April, May, June, July, August, September,
October, November or December; the start week can be the first, second, third, fourth, fifth or last
week of the month; the start date is Sunday, Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday.
end-time: Specifies an end time, in the hh:mm:ss format. Zeros can be omitted, unless you specify
00:00:00.
end-date: Specifies an end date, which can be set in the following ways:
• Enter the year, month and date at one time, in the MM/DD/YYYY or YYYY/MM/DD format.
• Enter the year, month and date one by one, separated by spaces. The year is in the range of 2000
to 2035; the month can be January, February, March, April, Ma
y, June, July, August, September,
October, November or December; the end week can be the first, second, third, fourth, fifth or last
week of the month; the end date is Sunday, Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday.
add-time: Specifies a time to be added to the standard time of the device, in the hh:mm:ss format. Zeros
can be omitted, unless you specify 00:00:00.
Usage guidelines
The interval between start-time start-date and end-time end-date must be longer than 1 day and shorter
than 1 year. If the current system time is in the specified daylight saving days, the add-time value
automatically adds to the system time.
To verify the setting, use the display clock command.