R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

149
[Sysname] clock timezone z5 add 5
Related commands
• clock datetime
• clock summer-time one-off
• clock summer-time repeating
• display clock
configure-user count
Use configure-user count to configure the maximum number of users allowed to enter system view at the
same time.
Use undo configure-user count to restore the default.
Syntax
configure-user count number
undo configure-user count
Views
System view
Default command level
2: System level
Parameters
number: Specifies the maximum number of concurrent users.
The following matrix shows the value ranges for the number argument:
6602 HSR6602 6604/6608/6616
1 to 247 1 to 7
RPE-X1 MPU: 1 to 494
RSE-X1/RSE-X2 MPU: 1 to 654
MCP-X1/X2 MPU: 1 to 14
Usage guidelines
Two users are allowed to enter system view by default.
When multiple users enter system view to configure certain attribute, only the most recent configuration
applies.
When the number of users has already reached the limit, other users can not enter system view.
Examples
# Configure to allow up to four users to enter system view concurrently.
<Sysname> system-view
[Sysname] configure-user count 4
Related commands
display configure-user