R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

156
Slot 0 CPU usage:
1% in last 5 seconds
0% in last 1 minute
0% in last 5 minutes
Slot 1 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
# Display the last fifth and sixth record entries in CPU usage statistics.
<Sysname> display cpu-usage 2 4
===== CPU usage info (no: 0 idx: 58) =====
CPU Usage Stat. Cycle: 60 (Second)
CPU Usage : 3%
CPU Usage Stat. Time : 2006-07-10 10:56:55
CPU Usage Stat. Tick : 0x1d9d(CPU Tick High) 0x3a659a70(CPU Tick Low)
Actual Stat. Cycle : 0x0(CPU Tick High) 0x95030517(CPU Tick Low)
===== CPU usage info (no: 1 idx: 57) =====
CPU Usage Stat. Cycle: 60 (Second)
CPU Usage : 3%
CPU Usage Stat. Time : 2006-07-10 10:55:55
CPU Usage Stat. Tick : 0x1d9c(CPU Tick High) 0xa50e5351(CPU Tick Low)
Actual Stat. Cycle : 0x0(CPU Tick High) 0x950906af(CPU Tick Low)
Table 24 Command output
Field Descri
p
tion
Unit CPU usage CPU usage rates (displayed only on an 6602).
1% in last 5 seconds
After a boot, the system calculates and records the average CPU usage rate
every 5 seconds.
This field displays the average CPU usage rate in the last 5 seconds.
1% in last 1 minute
After a boot, the system calculates and records the average CPU usage rate
every 1 minute.
This field displays the average CPU usage rate in the last minute.
1% in last 5 minutes
After a boot, the system calculates and records the average CPU usage rate
every 5 minutes.
This field displays the average CPU usage rate in the last 5 minutes.
Slot 0 CPU usage
CPU usage rates of the card in slot 0.
If multiple CPUs are on this card, Slot 0 CPU usage indicates the usage of the
primary CPU of the card in slot 0; Slot 0 CPU 1 CPU usage indicates the usage
of the secondary CPU of the card in slot 0. (On an HSR6602, 6604, 6608, or
6616.)
CPU usage info (no: idx:)
Information of CPU usage rate records (no: The (no+1)th record is displayed.
no numbers from 0, a smaller number equals a newer record. idx: index of the
current record in the history record table). If only the information of the current
record is displayed, no and idx are not displayed.