R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

104
Syntax
service slot slot-number
undo service slot
Default
Traffic of an RPR logical interface is processed by the card where the receiving RPR physical port resides.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
slot slot-number: Specifies the slot number of the card that processes traffic for the current interface.
Usage guidelines
If the card specified by this command is removed, traffic of the current RPR logical interface cannot be
forwarded. After the card is installed again, it resumes traffic forwarding for the RPR logical interface.
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
service No Yes Yes
Examples
# Specify the card in slot 2 to process traffic for Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] service slot 2
shutdown
Use shutdown to shut down the interface.
Use undo shutdown to bring up the interface.
Syntax
shutdown
undo shutdown
Default
An interface is enabled.
Views
Layer 3 RPR logical interface view, RPRPOS interface view
Default command level
2: System level