R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

193
Min Trans Inter: 200ms Act Trans Inter: 600ms
Min Recv Inter: 200ms Act Detect Inter: 1000ms
Running Up for: 00:02:36 Auth mode: None
Connect Type: Direct Board Num: 7
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
Table 55 Command output
Field Descri
p
tion
Total session number Total number of BFD sessions.
Up session number Total number of active BFD sessions.
Init mode BFD operating mode: active or passive.
session working under xx mode
IPv4/IPv6 BFD session mode:
• Ctrl—Control packet mode.
• Echo—Echo packet mode.
Local Discr Local ID of the session.
Remote Discr Remote ID of the session.
Source IP Source IP address of the session.
Destination IP Destination IP address of the session.
Session State Session state.
Interface Name of the interface of the session.
Min Trans Inter Expected minimum transmit interval configured on the interface.
Min Recv Inter Expected minimum receive interval configured on the interface.
Act Trans Inter Actual transmit interval.
Act Detect Inter Actual session detection timer.
Recv Pkt Num Number of packets received.
Send Pkt Num Number of packets sent.
Hold Time Length of time before session detection timer expires.
Auth mode Session authentication mode: simple, MD5, or SHA-1.
Connect Type Connection type of the interface.
Running up for Time interval for which the session has been up.
Chassis/Board Num Chassis/card maintaining the session.
Protocol Registered protocol.
Diag Info Diagnostic information about the session.
reset bfd session statistics
Use reset bfd session statistics to clear the BFD session statistics.