R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

49
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If the service instance ID is not specified, this command displays MEP lists in all service instances.
Examples
# Display the MEP list in service instance 5.
<Sysname> display cfd meplist service-instance 5
Service instance: 5
MEP list: 1 to 20, 30, 50.
display cfd mp
Use display cfd mp to display the MP information.
Syntax
display cfd mp [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the MP information on a port specified by its port
type and port number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no port is specified, this command displays the MP information on all ports.
The output is arranged by port name, then in the ascending VLAN ID order on the same port, and in the
order of outward-facing MEPs (from low to high level), MIPs, and inward-facing MEPs (from high to low
level) within the same VLAN.
Examples
# Display the MP information on all ports.
<Sysname> display cfd mp
Interface GigabitEthernet3/0/1 VLAN 100
MEP ID: 100 Level: 0 Service instance: 100 Direction: Outbound
Maintenance domain: mdtest0