R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

71
TxFlag: C2: 0x16
RxFlag: C2: 0x16
SDH error:
section layer: RS_BIP(B1) 0
line layer: MS_BIP(B2) 0, MS_REI 0
path layer: HP_BIP(B3) 0, HP_REI 0, HP_PJE 0, HP_NJE 0
Last clearing of counters: Never
Host receive Packets Bytes
unicast 0 0
multicast 0 0
Line receive Packets Bytes
unicast 0 0
multicast 0 0
Host send Packets Bytes
unicast 0 0
multicast 0 0
Line send Packets Bytes
unicast 0 0
multicast 0 0
Input Errors
parity 0 short 0 crc 0 ringiderr --
Output Errors
parity 0 short 0 giant 0 fifo 0
Control Frame In Out
Oam 0 0
Atd 0 0
Tc 0 1
Tp 0 774
Mode Packets Bytes
SaStrip 0 0
TtlDrop 0 0
TxFlood 0 0
RxFlood 0 0
Last 5 second Host input : 0.00 packets/sec 0.00 bytes/sec 0.00%
Last 5 second Line input : 0.00 packets/sec 0.00 bytes/sec 0.00%
Last 5 second Host output: 0.00 packets/sec 0.00 bytes/sec 0.00%
Last 5 second Line output: 0.00 packets/sec 0.00 bytes/sec 0.00%
Table 24 Command output
Field Descri
p
tion
RPRPOS2/1/1 current
state
Physical state of the RPR physical port:
• DOWN (Administratively)—The port has been administratively shut down with
the shutdown command.
• DOWN—The port is administratively up but physically down.
• UP—The port is up both administratively and physically.
Link delay is Delay interval before the interface takes an action for an alarm.