R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

83
IP address: 0.0.0.0
Station topology information on interface: RPR2
Table 30 Command output
Field Descri
p
tion
Ring-level topology information on
interface
Ring topology information of the station corresponding to the
specified interface.
Stations on ringlet0 Number of stations on the west span.
Stations on ringlet1 Number of stations on the east span.
Total stations on ring Total number of stations on the ring.
Jumbo preference
Indicates whether Jumbo frames are supported:
• regular—Not supported.
• jumbo—Supported.
Ring topology type Ring status: open ring or closed ring.
Local station topology information on
interface
Local topology information of the station corresponding to the
interface.
Hops Number of hops from the specific station to the local station.
Active protection mode
Protection mode:
• wrap—Wrapping mode.
• steer—Steering mode.
Protection state on the west span
Protection state on the west span:
• fs—Forced switch.
• sf—Signal fail.
• sd—Signal degrade.
• ms—Manual switch.
• wtr—Wait to restore.
• idle.
Protection state on the east span
Protection state on the east span:
• fs—Forced switch.
• sf—Signal fail.
• sd—Signal degrade.
• ms—Manual switch.
• wtr—Wait to restore.
• idle.
Sequence number Sequence number of the TP frame.
Last known neighbour on the west span MAC address of the last learned neighbor on the west span.
Last known neighbour on the east span MAC address of the last learned neighbor on the east span.
Local topology state Start (for topology initializing), stable, unstable, valid, or invalid.
Station topology information on
interface
Topology information of other RPR stations on the ring.
Station entry on ringlet0 Topology information of the neighbor on the west span.