R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

190
Config Pri : 110 Running Pri : 110
Preempt Mode : Yes Delay Time : 5
Auth Type : Simple Key : hello
Virtual IP : FE80::10
1::10
Virtual MAC : 0000-5e00-0201
Master IP : FE80::1
VRRP Track Information:
Track Interface: GE1/0/1 State : Up Pri Reduced : 30
# Display the detailed information about VRRP group 1 on Router B.
[RouterB] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet1/0/2
VRID : 1 Adver Timer : 400
Admin Status : Up State : Backup
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Become Master : 2200ms left
Auth Type : Simple Key : hello
Virtual IP : FE80::10
1::10
Master IP : FE80::1
The output shows that in VRRP group 1 Router A is the master, Router B is the backup and
packets sent from Host A to Host B are forwarded by Router A.
When interface GigabitEthernet 1/0/1 on Router A is not available, you can still ping Host B on
Host A. To view the detailed information about the VRRP group, use the display vrrp ipv6
verbose command.
# When interface GigabitEthernet 1/0/1 on Router A fails, display the detailed information
about VRRP group 1 on Router A.
[RouterA] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet1/0/2
VRID : 1 Adver Timer : 400
Admin Status : Up State : Backup
Config Pri : 110 Running Pri : 80
Preempt Mode : Yes Delay Time : 5
Become Master : 2200ms left
Auth Type : Simple Key : hello
Virtual IP : FE80::10
1::10
Master IP : FE80::2
VRRP Track Information: