R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

14
Step
Command
Remarks
2. Configure the errored
frame event detection
interval.
oam errored-frame period period-value
Optional.
1 second by default.
3. Configure the errored
frame event triggering
threshold.
oam errored-frame threshold
threshold-value
Optional.
1 by default.
Configuring errored frame period event detection
An errored frame period event occurs if the number of frame errors in a specific number of received
frames exceeds the predefined threshold.
To configure errored frame period event detection:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Configure the errored frame
period event detection period.
oam errored-frame-period period
period-value
Optional.
1000 milliseconds by default.
3. Configure the errored frame
period event triggering
threshold.
oam errored-frame-period
threshold threshold-value
Optional.
1 by default.
Configuring errored frame seconds event detection
An errored frame seconds event occurs when the number of error frame seconds detected on a port
during a detection interval exceeds the error threshold.
IMPORTANT:
Make sure the errored frame seconds triggering threshold is less than the errored frame seconds detection
interval. Otherwise, no errored frame seconds event can be generated.
To configure errored frame seconds event detection:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Configure the errored frame
seconds event detection
interval.
oam errored-frame-seconds period
period-value
Optional.
60 seconds by default.
3. Configure the errored frame
seconds event triggering
threshold.
oam errored-frame-seconds
threshold threshold-value
Optional.
1 by default.
Configuring Ethernet OAM remote loopback